|
| Total Basket Items |
 |
 |
|||
| Basket Total Exc Vat |
 |
|
 |
 |
||
  |
VW
Golf MK5 GTI/Jetta/Bora, (200
PS)
VW MK5 Golf Edition 30, (230 PS) VW Eos, (200 PS) Audi A3, (200 PS) Audi S3 (8P), (260PS & 265PS) Audi TT, (200 PS) SEAT Leon FR, (200 PS) Skoda Octavia, (200 PS) Seat Leon Cupra, (240 PS) Seat Leon Cupra K1, (240 PS) |
NGK
IRIDIUM IX spark plugs - BKR7EIX are one heat range colder
than the standard 2.0 TFSI spark plugs. A colder heat range plug is necessary when the engine is highly modified for more performance - subjected to heavy loads, or is run at High RPM's for a significant period of time, for instance track days or speed trial events. Colder spark plugs remove heat from the spark plug quicker, helping to reduced timing pull required from the Enigne Control Unit. |
| |
|
||
  
|
VW
Golf MK5 GTI/Jetta (200
PS)
VW MK5 Golf Edition 30, (230 PS) VW Eos, (200 PS) Audi A3 (8P), (200 PS) Audi S3 (8P), (260PS & 265PS) Audi TT, (200 PS) SEAT Leon FR, (185PS & 200 PS) Skoda Octavia, (200 PS) Seat Leon Cupra, (240 PS) Seat Leon Cupra K1, (240 PS) |
Even
on a standard unmodified 2.0 TFSI engine it is advisable to periodically
inspect the mechanical condition of the components that drive high pressure
fuel pump. If the top of the cam follower for the high pressure fuel pump is found to be wearing excessively - Then this replacement OEM part is required to avoid any form of expensive damage as a result of a total cam follower failure. |
|
Whiteline
AntiLift Kit Whiteline part number: KCA316 |
|
|
|
  |
VW
Golf MK5 GTI/Jetta/Bora, (200
PS)
VW MK5 Golf Edition 30, (230 PS) VW Eos, (200 PS) Audi A3, (200 PS) Audi A3, (160PS 1.8 TFSI - 1.8 16v) Audi S3 (8P), (260PS & 265PS) Audi TT, (200 PS) SEAT Leon FR, (200 PS) Skoda Octavia, (200 PS) Skoda Octavia, (160PS 1.8 TFSI -1.8 16v) Seat Leon Cupra, (240 PS) Seat Leon Cupra K1, (240 PS) |
The
high compliance bushing used throughout the MK5 platform (PQ35), and
in particular the front lower control arm rear bush, makes the car very
dull and unresponsive. The front can be addressed with a WALK (Whiteline Anti-lift / Caster kit) using a specially engineered lower control arm rear polyurethane bushing designed for an extra +0.5deg with static caster increase and revised anti-lift geometry. The result is increased front grip in both longitudinal (forward) and lateral (cornering) acceleration, and improved steering feel and response.. For more information see the link here |
| |
|
||
  |
VW
Golf MK5 GTI/Jetta/Bora, (200
PS)
VW MK5 Golf Edition 30, (230 PS) VW Eos, (200 PS) Audi A3, (200 PS) Audi S3 (8P), (260PS & 265PS) Audi TT, (200 PS) SEAT Leon FR, (200 PS) Skoda Octavia, (200 PS) Seat Leon Cupra, (240 PS) Seat Leon Cupra K1, (240 PS) |
To
complement the Whiteline
AntiLift
Kit these Front Wishbone
Front Inner bushes are manufactured by Powerflex and will ensure that
all of your front wishbone bushes have simular compliance
to the uprated items fitted into the Whitline AntiLift Kit. These bushes are sold as a pair, In the kit you will therefore get 2 bushes required to do both front wishbones. Please note that some Powerflex bushes are manufactured to order and can take up to 10 working days to get delivered to JKM before we can despatch. If you are unsure or want more information on the exact availability contact JKM. |
| |
|
||
 |
VW
Golf MK5 GTI/Jetta/Bora, (200
PS)
VW MK5 Golf Edition 30, (230 PS) VW Eos, (200 PS) Audi A3, (200 PS) Audi S3 (8P), (260PS & 265PS) Audi TT, (200 PS) SEAT Leon FR, (200 PS) Skoda Octavia, (200 PS) Seat Leon Cupra, (240 PS) Seat Leon Cupra K1, (240 PS) |
Forge
Part number: FMBGFK2 For all those wishing to install a boost gauge to their 2.0 litre TFSI or TSI engine, Forge have a CNC inline take off, which is installed on to the inlet manifold, and allows up to three connections to be made if required. These are available in Black anodised finish only. To download fitting instructions for this product ....click on the link here |
| |
|
||
 
|
VW
Golf MK5 GTI,(200
PS)
VW MK5 Golf Edition 30, (230 PS) |
This
is designed to fit ALL MK5 Golfs (with black air vents). The pod allows
any 52mm gauge or dial to be integrated into the driverside air vent,
this is ideal for keeping the O.E look to the interior but still allowing
any 52mm gauge of your choice to be seamlessly incorporated into the
Mk5 Golf's dash while still keeping any required airflow to the driver
(ideal for mounting a boost gauge for your 2.0 TFSI). This product is
a direct replacement for the original vent and does not require any
dissassembly of the original vent its a simple direct replacement item. This pod does not include any guage, please see below or here for guages. |
| |
|
||
  
|
Any
52mm Guage Pod or mount
|
Newsouth
Performance Using a unique patented technology for color selection, the Spectrum gauge family gives you unprecedented flexiblity in choosing the appearance of your gauges. With 100 different color choices, these LED backit gauges give off a smooth light. You can choose a gauge color of your choice or match your cars instrument panel. Sporting a lighted red needle, the Spectrum™ boost gauge comes pre-wired with connectors, tubing and fittings for a complete and simple solution. For more guages see here |
| |
|
||
 |
VW
Golf MK5 GTI/Jetta (200
PS)
VW MK5 Golf Edition 30, (230 PS) Seat Leon Cupra, (240 PS) Seat Leon Cupra K1, (240 PS) |
Forge
Part Number: FMMK5CTC Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system. This oil catch tank system removes aerated oil so that it can be drained and recycled. This Kit is suitable for UK specification cars with a carbon canister fitted Note: all UK spec 2.0 TFSI engines that JKM have seen are fitted with this filter. For an image of what this filter looks like please see the link here |
Please
note:
The prices entered above where correct & accurate at the time
of entering this web page. In the unlikely event that you buy a product
using an 'Add to Basket' link, and the prices are found to be incorrect,
JKM will hold back the order and contact you before completing. All effort is made to ensure that prices are kept accurate and correct at all times, Please contact JKM for more information. |
| JKM Motor Services Ltd, Bolde Close, Copnor, Portsmouth, Hampshire, PO3 5RD, Registered in England No 4456400 / VAT GB 758251218 Website and Content Copyright © JKM Motor Services Ltd All rights reserved Page last updated: |