JKM Performance - JKM K04 Turbo upgrades for the 2.0 TFSI engine


	Link to the JKM K04 upgrade page

If you have the required skills and knowledge to perform a 2.0 TFSI K04 turbo upgrade yourself on your own engine then this comprehensive K04 hardware upgrade kit is ideal. This is the same 'kit of parts' as used by JKM Performance for conversions performed in house.
What this means for you is that you will get all of the hardware items required to perform the upgrade in one package - meaning no more trips to a parts supplier as you work out what you think is required.
Please be aware that in purchasing this kit you acknowledge the terms associated with support for installation as listed at the bottom of the page.

• Audi S3 2.0 TFSI K04 Turbocharger • Turbocharger Oil feed pipe including required oil sealing washers • 4 x Audi S3 TFSI Fuel injectors • 4 x TFSI Injector installation seal kits. Please note that an FSI Injector installation kit is required in order to remove your old injectors and install these injectors correctly. • Audi S3 Turbocharger discharge pipe • Audi S3 front engine air transfer pipe (Transfer pipe mounted to front of engine) • All Diverter Valve relocation components required including cast intermediate flange and all required air flow pipe work. Including the required electrical plug/socket housings with short pre crimped wire terminations (to allow you to extend the diverter valve wiring easily) • All of the required new OEM gaskets such as Inlet and exhaust gaskets along with all required bolts, Nuts, Spring Clips, Fasteners and seals for an all OEM part installation. • Please be aware that NO SOFTWARE is included in this hardware upgrade kit - Contact JKM if you required suitable & well proven performance software. Please note that this kit does not include the short plastic turbo intake arm that is removed when you install any high flow intake kit. If this arm is required please contact JKM.	**This Package is for the following *vehicles Only:* BWA & AXX engine codes VW Golf MK5 GTI, (200 PS) VW Jetta, (200 PS) Audi A3, (200 PS) SEAT Leon FR, (200 PS) SKODA Octavia VRS, (200 PS) For other vehicle applications please contact JKM*
	K03 to K04 hardware conversion kit JKM: £1882.97+Vat

Below is a Selection of images showing some of the items that are included in the TFSI K04 conversion kit


Audi S3 K04 Turbocharger	Some of the Audi S3 pipework	Diverter Valve Relocation to the front of the engine bay	Audi S3 TFSI Fuel Injectors for the K04 upgrade

----Important Support for Installation terms associated with purchasing a K04 upgrade kit from JKM----
Please note that JKM do not supply any form of installation instructions with this K04 upgrade. You will be essentially supplied a kit of parts.
You are advised to purchase this kit ONLY IF YOU ARE COMPENTENT with the 2.0 TFSI engine and are competent at the working processes and procedures required when working on the 2.0 TFSI engine. JKM do not have technical support staff in place to offer step by step guidance and support during installation on this level of hardware upgrade.
JKM can guarantee that you will be supplied with all of the required parts to complete the installation and the parts should be self explanatory for the experienced installing Technician when performing this conversion. Therefore JKM highly advise that this upgrade is ONLY INSTALLED BY QUALIFIED COMPENTANT PERSONAL.
JKM will not accept any liability from incorrectly installed components or damages that arise as a result of incorrectly installed items.
As detailed above JKM do not provide any form of software with the K03 to K04 upgrade kit, This is purely a kit of hardware parts.

Total Basket Items					JKM Search Powered by FreeFind
Basket Total Exc Vat