JKM Performance - JKM K04 Turbo upgrades for the 2.0 TFSI engine

	Specifically for the customer who wants BIG Power & Torque from their (197 BHP) 2.0 TFSI engine. Choosing to upgrade to the larger K04 turbocharger is a fantastic conversion where by you will make very strong power and torque but yet retain the TFSI engines smoothness and drive quality. The torque band is extended considerably and the power continues to increase much later into the rev range. Both the 'JKM Basic K04' and the 'JKM Advanced K04' upgrades change a large number of the key hardware components that differentiate the K03 turbocharged (197 BHP) engine from the larger K04 turbocharger equipped 260 BHP Audi S3 engine. If you have already substantially modified your K03 turbo equipped car, the JKM Basic K04 upgrade may be the ideal next step for you.

	This upgrade includes an Audi S3 K04 Turbocharger, Audi S3 FSI Fuel injectors, Audi S3 all aluminium Intercooler, Diverter Valve Relocation to front of engine, Audi S3 Turbo discharge and Diverter valve pipe work, Audi S3 throttle to intercooler pipe work along with all of the required OEM gaskets, bolts, nuts, clips and fasteners required for a complete all OEM part installation. A full installation and set up for the 'JKM Basic K04' upgrade complete with REVO K04 upgrade specific software (£699+Vat), Oil & filter change and Free before and after Dyno runs is £3404.26 +Vat Important Note for existing REVO customers: The usual software upgrade discount will apply accordingly, for example if you are currently on REVO stage 2 software then subtract £549 from the pre Vat price above, making the JKM K04 upgrade price £2855.26 +Vat


K04 Turbocharger	K04 Turbocharger	S3 Intercooler + Pipework	S3 FSI Fuel Injectors

Various air pipe changes - Click to Enlarge

Enlarged Turbo Discharge Pipe - Click to Enlarge

K04 OEM Pipework

Diverter Valve Relocation

Enlarged Turbo Discharge

FSI Fuel Injectors in Cylinder Head


Dyno Dynamics Power Runs	Engine bay - picture 1	Engine bay - picture 2	JKM 'Advanced K04 upgrade' Power and Torque


	This is a complete package for owners looking for the best all round tuning upgrade for their 197 BHP 2.0 TFSI engine. The 'JKM Advanced K04' upgrade includes all of the 'Basic K04' upgrade parts plus the additional items listed below. This package includes a FREE VF Engineering Intake system, FREE exhaust fitting, FREE VF Torque arm insert along with FREE before and after Power runs on our Dyno Dynamics rolling road. All Dyno setups will be backed up with actual road testing and data logging where adjustments will be made if found to be required. The 'JKM Advanced K04' upgrade will transform your K03 equipped car into an extremely powerful car whilst maintaining OEM smoothness and ride quality - a daily usable conversation that is both powerfull and economical when driven sensibly. Torque is taken from the stock level to 312 Lb/Ft* - and is held above 250Lb/Ft from 2750rpm through to 6400rpm. The peak Horsepower level is increased from the stock 197bhp* to 309bhp. The 'JKM Advanced K04'* upgrade for the TFSI engine will provide absolutely superb acceleration in any gear - with the minimum of turbo lag ! This conversion provides the best all round combination of torque and horsepower for a street car - exploiting this fanstic engine and importanlty remaining economical when driven sensibly. Approximate installation, set up and test time for this package: Contact JKM Prices stated are for a complete Drive in & Out Installation service at our Portsmouth Workshop. * BHP and Lb/Ft figures shown are approximate levels and are taken with vehicle running on Shell V Power fuel.


JKM 'Advanced K04 upgrade' Typical Power and Torque Power shown against a stock 200PS TFSI engine	JKM 'Advanced K04 upgrade' Typical Power and Torque Power and Torque Level (Flywheel Calculated) 18/10/2008	JKM 'Advanced K04 upgrade' Typical Power and Torque. Shown against a typical Stage 1 Revo TFSI Seat Leon Cupra with a high flow intake system & APR Fuel pump assembly	JKM 'Advanced K04 upgrade' Power and Torque at Wheels. Power and Torque Level recorded at the wheels on 18/10/2008

			1) JKM Basic K04 Conversion as detailed above K04 Turbocharger and hardware conversion as detailed above. 2) Revo Technik K04 software - K04 specific software Including dyno & road set up & before & after diagnostics. This software as a standalone product retails at £699+Vat. 2) FREE VF Engineering Intake system & Heatshield Full intake system modified to suit the relocated Diverter Valve return, A higher flowing K & N filter than the one VF supply, along with the VF Heatshield - (Please note that the Stock Engine cover is removed) 3) High Flow APR TFSI Fuel pump upgrade Including fitting and testing under load on your vehicle 4) Complete Turbo Back Milltek Exhaust system Please note that due to a number of variations on tailpipe design in some cases, An exhaust with direct fitment to an OEM rear Valance along with Resonated (Quieter type) silencers has been selected for pricing below. Other options are available on this package - Please contact JKM for a tailored exhaust quotation if you require a different option. 5) Audi S3 Intercooler upgrade - complete installation 6) Including FREE - Exhaust Fitting 7) Including FREE - Fitting of the High flow intake system 8) Including FREE - VF Torque arm insert (Including fitting) 9) Including FREE - Before and after Dyno runs The JKM TFSI K04 upgrade package as a complete drive in drive out Installation is: £5252 + Vat

Important Note for existing REVO customers:
The usual software upgrade discount will apply accordingly, for example if you are currently on REVO stage 1 software then subtract £499 from the pre Vat price above.

Total Basket Items					JKM Search Powered by FreeFind
Basket Total Exc Vat